Build your own mini pizza oven and cook tiny treats!
Construct a realistic miniature wood-fired pizza oven with a hinged door, removable cooking surface, and chimney. Perfect for pretend play cooking or heating small snacks with adult supervision.
“A kids pizza oven”
This kit was designed by AI based on a kid's imagination. Try it with your own idea →
Step 1: Lay out all wooden panels, 3D-printed blue parts, and hardware. Check that you have all pieces from the parts list.
Step 2: Insert the back wall into the rear slots of the base plate. The wall should stand vertically.
Step 3: Insert the left and right walls into their respective slots on the base plate to form three walls.
Step 4: Attach the roof support brackets inside the left and right walls using M3x8mm screws, nuts, and washers. These will help support the dome.
Step 5: Place the dome roof on top of the three walls. The dome should rest on the top edges of all walls.
Step 6: Secure the dome to the left and right walls using M3x8mm screws through the mounting holes. Use nuts and washers.
Step 7: Press the chimney into the round hole on top of the dome. It should fit snugly without screws.
Step 8: Attach the door hinge to the left wall at the front opening using M3x6mm screws, nuts, and washers.
Step 9: Connect the door panel to the hinge using another M3x6mm screw. The door should now swing open and closed.
Step 10: Attach the door handle to the center of the door panel using an M3x6mm screw, nut, and washer.
Step 11: Place the removable cooking surface inside the oven chamber. It should sit flat on the base.
Step 12: Test the door by opening and closing it. Your pizza oven is ready for pretend cooking adventures!
This Wood-Fired Pizza Oven kit was designed entirely by artificial intelligence based on a young inventor's idea. Every InventShack kit features precision laser-cut 1/8" birchwood plywood panels, custom 3D-printed PLA components, and real M3 socket head cap screws with hex nuts — the same hardware used in real engineering projects.
Unlike mass-produced building kits, this design is one-of-a-kind. The AI selected from a library of parametric component templates — base plates, side panels, wheel discs, axle mounts, rubber band hooks, corner brackets, and more — then configured each part's dimensions to create a working build. All holes align to a 10mm grid system, ensuring every part connects properly.
Perfect for kids ages 8-10 who love building, inventing, and engineering. Whether you have a laser cutter, a 3D printer, or just want to see what AI can design — InventShack turns kids' ideas into real, buildable projects.
We're building a service that ships AI-designed kits with all parts included. Sign up to be notified when we launch.
Tell the AI what you want to build and get a complete kit designed in seconds — laser-cut wood parts, 3D-printed components, and step-by-step assembly instructions.